Single Axis Mecha C1 E1 With NN3 MK3 Nadir Adapter (F9905-6)
$615.95
A new motorized rotator head for use with NN3 MKII, NN3 MK3, R1, R10, R20, RS-1
Only 2 left in stock
Single Axis Mecha Automated Solution for Nodal Ninja 3 MK2, MK3 or Nodal Ninja RS1
- The motorized MECHA E1 rotator will support up to 6.6bs (3kg), including the pano head above it.
- It is lightweight, quiet and power efficient. Together with a single axis Controller C1 (F9910), it automates the panning axis of supported Nodal Ninjas.
- Another set of E1 rotator and C1 controller can be added to motorize Nodal Ninja MK3 tilt axis for multi-row applications.
- MECHA E1 is NOT recommended for larger Nodal Ninjas (NN6 and M Series) unless only a small camera and lens are used.
Mecha Single Axis Controller Features:
- Supports one Mecha rotator.
- Compact controller with built in battery and charger.
- NCR18650GA high capacity batteries, 7.2v, 3350mAh, 12Wh.
- Supports up to 3.3lbs (1.5 kg) vertical loading, including panohead, and 1.0Nm turning torque (center of gravity is 8cm from pivot). DSLR’s with battery grips may exceed recommended weight load.
- WiFi remote control from smartphones, tablets, PCs by using simple web page interface.
- Supports linking and controlling multiple controllers via WiFi , connection via a WiFi access point, over the air firmware upgrade and remote control over the internet.
- 3 buttons to run presets stored in the memory, which can be configured via the web page interface.
- 5 LED’s to indicate the remaining battery capacity.
- CAM port with opto-isolated trigger for focus and shutter release.
- Multipurpose AUX port (to be implemented with future firmware upgrade) for shutter confirmation, Radio Frequency Start/Stop remote trigger, wired Start/Stop trigger or IR remote emitter etc.
Total weight of Mecha E1 Rotator + Single Axis Controller approx. 17.35 oz (492g).
Essential Items NOT Included:
- One Long Shutter Release Cable for Dual-Axis MECHA – select from the options on the right
Recommended Accessories:
- PC Sync Cable for Shutter Release Confirmation
- Hot Shoe to PC Sync Adapter (for Cameras without PC Sync Port)
C1 Controller has a built in battery and charger. No extra battery or chargers required.
MECHA is compatible with cameras having a wired remote port. Use the Select Shutter Release Cables filter to check compatibility and choose the right cable for your camera.
MECHA can only trigger the camera. It acts like a typical remote shutter release. Auto exposure bracketing is done by the camera.
14 day money back guarantee
1 year factory warranty
- Mecha Quick Reference Guide safe links:
- Accessing the Web Control Interface of MECHA – http://bit.ly/mecha-access
- How to update the firmware – http://bit.ly/mecha-firmware
- The Mecha E1 – basic setup and how to use – http://bit.ly/mecha-setup
- Mecha Questions Forum – http://bit.ly/mecha-forum
- For product suggestions/concerns and support please visit our forum click here.
Disclaimers:
Bearing and gear are classified as consumables and not covered by warranty. Their lifetime have been thoroughly tested for the rated loads. Any wearing will be a result of long time overloading or misuse.
| Cable | Fujifilm RR-90 (F9980-3), Minolta RC-1000S, Sony RM-S1AM (F9980-4), Olympus RM-CB1 (F9980-8), Olympus RM-UC1 (F9980-9), Panasonic DMW-RSL1 (F9980-10), Pentax CS-310 (F9980-12), Canon RS-60E3, Contax LA-50, Pentax CS205, Olympus RM-CB2, Sigma CR-21 (F9980-1), Canon RS-80N3 (F9980-2), Nikon MC-30A (F9980-5), Nikon MC-DC1 (F9980-6), Nikon MC-DC2 (F9980-7), Sony RM-VPR1 (F9980-11) |
|---|---|
| Hot Shoe | JSC-2 Hot Shoe (most popular), JSC-6 Hot Shoe, JSC-8 Hot Shoe |
Be the first to review “Single Axis Mecha C1 E1 With NN3 MK3 Nadir Adapter (F9905-6)”
Reviews
There are no reviews yet.